- Seen : 85 View
Test and debugging about oil supply amount and uniformity each cylinder of injection pump.
Check the oil supply spacing of each cylinder and oil supply starting point in the static state.
Check and adjust the performance of mechanical speed controller.
The sealing inspection of pump body.
Measure the interior pressure of distribution pump.
Check the vacuum capacity regulators.
Check the pressure of compensator.
Checking the fuel supply pump.
Measure the advance timer device.
User can change the temperature.
TECHNICAL PARAMETER
Motor power: 5.5, 7.5, 11, 15, 18.5, 22KW
Power supply voltage: 380/220V
Power supply frequency: 50 / 60Hz
Protection level: ip54
Speed range: 0--4000rpm
Times set range: 0--9999
Temperature setting range: 0--80 C
Drive shaft center height: 125mm
DC Power supply: 12 / 24V
Drive coupling diameter: 120mm
Measuring cups: 45mi, 150mi, 260ml (option)
Number of test cylinders: 6, 8, 12
Fuel pump: 10L / min
Oil supply pressure: high voltage 0--40bar, low voltage 0--4bar
Mailbox volume: 60L
Pressure gauge: low pressure 0--6bar, high voltage 0--60bar, internal pressure 0--16bar.
Positive and negative pressure -1--2.5bar, oil meter 0--10bar
Heating power: 2KW
Temperature control range: 30--65 C
External dimensions (long x width x high) mm:2100 * 1080*1750
Net weight: 900KG
OPTION(ON REQUEST):
Oil lubricate
Measurement of rack travel
Printer
Saler Company Information
