- Seen : 99 View
The main component of the 1. ozone generator is a silent discharge tube ozone generator (with small noise and high purity). The output control accuracy of 4 ~ 20mA is 10%.
2. electrode cooling mode: air cooling type;
3. ozone produces gas supply source: direct air;
The 4. ozone detector is made of imported CT electrochemical sensor and shell, electronic circuit board, shielding wire and so on.
5. the output signal of the probe of ozone detection: 4 ~ 20mA;
The probe acquisition precision 6. ozone detection: less than 5%F.S;
Product use: the ozone aging test box is suitable for testing the aging cracking test of non-metallic materials and rubber products, and testing the aging degree of the products in the ozone environment through a certain temperature.
1. Product specifications:
The size of the model JW-100 is D * W * H 500 * 500 * 400:mm.
Two. Technical parameters:
1. temperature range: 0 to 70, RT+10 to 70.
2. humidity range: 40% ~ 98%R.H, 65% ~ 98%R.H
3. temperature fluctuation: less than 0.5 DEG C
4. temperature uniformity: less than 2 DEG C
5., temperature deviation: less than 1.5 DEG C
6. humidity fluctuation: +2, -3%R.H
7. heating rate: 0.7 ~ 1 C /min
8.: the cooling rate at room temperature to 10 degrees less than 20min / non limiting
9. ozone concentration: 10 ~ 500pphm
10. gas flow velocity: 12 ~ 16mm/S
11. ozone sample rack: static and dynamic tensile test rack.
12. frame speed: 360 degree rotating sample rack (speed 1r/min).
13. time set range: 0~9999 hours
14. power requirements: AC380 (+ 10%) V/50HZ, three-phase five wire system.
Saler Company Information
