- Seen : 198 View
Intelligent electromagnetic flowmeter consists of two parts: sensor and transducer. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow rate of the conductivity of the conductive liquid, which is more than 5 S/cm. In addition to measuring the volume flow of the general conductive liquid, it can also be used to measure the volume flow of the liquid solid two-phase suspension liquid such as strong acid, strong alkali and other strong corrosive liquids. Widely used in petroleum, chemical, metallurgy, textile, paper making, environmental protection, food and other industrial sectors and municipal management, water conservancy construction, river dredging and other areas of traffic measurement.
Features
Intelligent electromagnetic flowmeter measurement is not affected by fluid density, viscosity, temperature, pressure and conductivity.
Intelligent electromagnetic flowmeter measurement pipe unimpeded flow parts, no pressure loss, straight pipe requirements lower.
The intelligent electromagnetic flowmeter sensor can be provided with a grounding electrode to realize the good grounding of the instrument.
Intelligent electromagnetic flowmeter sensor using advanced processing technology, so that the instrument has a good ability to resist negative pressure.
The converter uses a backlit LCD display, which makes it easy to read in the sun or in a dark room.
By setting the parameters of infrared remote control, in the harsh environment do not open the cover of the converter can also be set safely.
Intelligent electromagnetic flowmeter converter with self diagnosis alarm output, air load detection alarm output, the upper and lower limit alarm output, the output value of the flow and other functions.
Intelligent electromagnetic flowmeter can be used not only for general process detection, but also for the measurement of pulp, pulp and paste.
Basic parameters
Nominal diameter DN10-DN2000
Nominal pressure 0.6 ～ 70MPa
Accuracy 0.5 or 1.0
Installation mode Flange mounting, flange holder is optional
Ambient temperature -25℃～+60℃
Medium temperature Split type chloroprene rubber lining, polyurethane lining: -10℃～+8℃
PTFE,PFA, F46 lining:-10℃～+160℃, Integrated type: -10℃～+80℃
Medium conductivity ＞5μs/cm
Min flow rate measurement 0.1m/s
Max flow rate measurement 15m/s
Range ratio 1:20，or custom
Monitor standard configuration
Output signal Pulse /4-20mA (load resistor 0-750)
Power supply 220VAC, tolerance 15% or +24 VDC, ripple ≤ 5%
Communication Interface Optional RS485/RS232
Protocol MODBUS、HART、Profibus,etc
Measurement pipe (lining) material Chloroprene rubber, polyurethane, PTFE, PFA, F46 and other decay resistant materials
Measurement element (electrode) material 316L stainless steel, titanium alloy, Hastelloy alloy, tantalum alloy, platinum iridium alloy, tungsten carbide
Explosion-proof grade Exd[ia]qIICT5/ ExmbⅡT4
Structural style Integrated type, split type, immersion type, explosion-proof type
Protection grade IP65, IP68 optional (IP65: dust tight, water spray; IP68: dust tight, continuous immersion, only for split type)
Power consumption ＜15W
Saler Company Information
