- Seen : 99 View
It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test.
Suitable for metal, rubber, plastic, spring, textile, Organic / Inorganic and components testing. It is widely
used in the corresponding industries, research and development, test institutes and training centers etc.
Standards
ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002,
GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849-2008,GB6349-1986, GB/T
1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc.
Safety Divice
Stroke protection: Machinery,computer double protection, prevent over preset
Force protection: system setting
Emergency stop device: handing emergencies
General installation conditions and energy medium requirements
1. Temperature within the range 0c~50c
2. Temperature of work area the range is 0-55c
3. Relative humidity lower than 95%
4. Noise level 25 DB
5. In an environment without obvious magnetic interference and surrounding non-corrosive media
6. In a shock-free, vibration-free environment
7. Leave space not less than 0.7m around the tester, clean and dust-free work environment
8. The base and rack are properly installed on a solid level base
9. Power supply: 80-220V±10% 50Hz 5 A
Specifications
1. Package: Fumigated wooden case
2. Dimension(mm): 740*420*1720
3. Packing size(mm): 910*530*1890
4. Crated weight(kg): 340
5. Lead time: 15 working days
Saler Company Information
