- Seen : 283 View
automobile and communication,using rainfall simulation to test the product's waterproof performance and assess the product's waterproof performance's loss classification. It's suitable for electrical and electronic products, lamps and lanterns, electrical cabinet, electrical components, automobile, motorcycle parts and other products. It provides the basis to improve the performance of the products.
1. Name: Intergrative rain spray equipment
2. Model no. ZHLX-C
3. Constitution: The lab is maily consist of room body, swing pipe tester, dripping tester, jawp tester,
inundating tester.
Product Image(Simulate Enviroment IP Grade Rain Spray Waterproof Test Equipment)
Simulate environment IP Grade Rain Spray Waterproof Test Equipment
Specifications and technical parameters
1. Dimesion of working room: 4000*6000*2600mm(D*W*H), it can be made as requirement.
2. Door dimention: Swing-hinged door 1600*2000mm(W*H), the color is sea-blue(PB05).
3. Swing pipe rain rester LK8101(IPX3,IPX4)
3.1 Spray orifice diameter: φ0.8mm, φ0.4mm; space between 50mm
3.2 swing pipe inside diameter: φ15mm
3.3 Pendulum Swing tube range: ±45°,±60°,±90°,±180°(Continuous adjustable)
3.4 Swing ring radius: R1000mm, R800mm, R400mm(adjustable)
3.5 Swing pipe speed: non-polar timing
3.6 Swing pipe height: 800mm higher off the ground
3.7 Rain hydraulic pressure: 80-400Kpa(adjustable)
3.8 Amount of nozzle: it depends on international standard and swing pipe radius
3.9 Spiracle flow rate: 0.067-0.074L/min/hole(adjustbale)
3.10 Test-bed dimension: φ400mm rotating floor(lifting), bearing capacity is 200kg
3.11 Electric installation: four-way output defend from wire intertwist device,electrify sample 5-15V
3.12 Test-bed rotate speed: 5-17r/min non-polar timing
3.13 Test-bed angle: 0°- 15°(adjustable)
3.14 Spray pump water: clean soft running water
4. Dripping tester LK8102(IPX1 IPX2)
4.1 Dripping amount: IPX1:1mm/min(+0.5mm/min, -0mm/min); IPX2:1mm/min(+0.5mm/min, -0mm/min)
4.2 Dripping aperture: φ0.4mm
4.3 holes pitch: 20mm
4.4 Dripping range: 1000*1000mm
4.5 Test-bed angle ajusting: 0°- 45°
4.6 Dripping chamber adjustable: 200mm-2000mm
4.7 Test-bed dimenstion: 500*500mm
4.8 Test-bed rotating speed: 1-5r/min
5. Handheld spray device (IPX5, IPX6)
5.1 IPX5 rainproof experimental nozzle
1) Nozzle inside diameter: 6.3mm
2) Water discharge: 10-20L/min(adjustable)
Saler Company Information
