Petroleum Products Kinematic Viscosity Tester
Petroleum Products Kinematic Viscosity Tester
  • Seen : 251 View

0
Petroleum Products Kinematic Viscosity Tester

The instrument is designed and made as per the National Standard GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”. It is suitable to determine kinematic viscosity of liquid petroleum Products (Newton liquid) at a certain temperature. It is also in accord with requirements of SY/T 5651 “Technical Condition for Petroleum Products Kinematic Viscosity Tester”.

 

Technical parameters:

1. Power supply: AC 220V±10%, 50 Hz;
2. Heating power: two grades; 1000 W (For auxiliary heating) and 650 W (For temperature controlling);
3. Stirring motor: 6 W, 1200 RPM;
4. Temperature controlling point: 20, 40, 50, 80 and 100 ℃;
5. Temperature controlling accuracy: ±0.01℃;
6. Constant temperature bath: 20 L, two layers bath;
7. Ambient temperature: -10℃~+35℃;
8. Relative humidity: <85%;
9. Temperature sensor: High precision and heat sensitive resistance;
10. Total power consumption: not more than 1800 W;
11. Capillary viscometer: 11 pieces in a group, Inner diameters of them are 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively.

Saler Company Information

Company : TRYTE TECHNOLOGY (HUNAN) DEVELOPMENT CO., LTD
Phone : 0085223892981
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Petroleum Products Kinematic Viscosity Tester

The instrument is designed and made as per the National Standard GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”. It is suitable to determine kinematic viscosity of liquid petroleum Products (Newton liquid) at a certain temperature. It is also in accord with requirements of SY/T 5651 “Technical Condition for Petroleum Products Kinematic Viscosity Tester”.

 

Technical parameters:

1. Power supply: AC 220V±10%, 50 Hz;
2. Heating power: two grades; 1000 W (For auxiliary heating) and 650 W (For temperature controlling);
3. Stirring motor: 6 W, 1200 RPM;
4. Temperature controlling point: 20, 40, 50, 80 and 100 ℃;
5. Temperature controlling accuracy: ±0.01℃;
6. Constant temperature bath: 20 L, two layers bath;
7. Ambient temperature: -10℃~+35℃;
8. Relative humidity: <85%;
9. Temperature sensor: High precision and heat sensitive resistance;
10. Total power consumption: not more than 1800 W;
11. Capillary viscometer: 11 pieces in a group, Inner diameters of them are 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively.

Saler Company Information

Company : TRYTE TECHNOLOGY (HUNAN) DEVELOPMENT CO., LTD
Phone : 0085223892981
More Information : View
Online order registration form