- Seen : 254 View
6.Fiber content 12%-35% adjustable, error ±1%.
7.The running speed of mesh belt shows the current mechanical running meter per minute. Running speed can be adjusted on the touch screen.
8.Main drive roll with skid strip to avoid the skidding of mesh belt. Running speed of mesh belt is 5-15 meters/minute,can be adjustable. Assemble the automatic rectifying function of PLC mesh belt, ensure the normal and reliable operation of the mesh belt in production
9.The highest production speed is 2.5 tons per hour when the tensile strength of the film is achieved .China made drive reducer ,3kw Variable frequency drive motor.
10.The rollers in the impregnation section ≥ 39 pcs(Main drive roller 2pcs, upper and lower dipping roller 39pcs, mesh belt up tight roll 4 pcs) Compaction cylinder 10pcs.
11.Chopped fiber cutter frame 1 set,motor 1.5kw, minimum cut length for fiber is 25.4mm。The thread tube is 32sets. High precision cutter roller can guarantee cutting quality and extend the service life of blade and rubber roller.
12.Installation of glass fiber dispersing device, make the glass fiber distribute evenly on the resin paste in the shape of net.
13.Sheet production speed can be adjusted by two buttons at any time and keep the same fiber content.
14.Installation of 2pcs film flattening roll, 2 sets of brake system to make the film enter into the scraping paste area without wrinkle and make sure the paste material evenly on the film. There are places for the spare film on the upper and lower rack.
15.Doctor blade assembly can be pneumatic lifted to make it easy to be cleaned after the production, the gap adjustive error between scraper and base plate≤ 0.05 mm. The function of quick lift of the scraper can prevent the film from being cut by the particle in the resin paste.
16.Electric crane will be installed on the upper trough for changing the film to install the spare film quickly, to ease of work intensity
17.All rollers’ surface of unit are coated or chrome plated.
18.Electrical Control: Electrical control cabinet with machine. 10 inch colorful touch screen. PLC, frequency convertor , will be Mitsubishi brand. Circuit breaker, contactor,small relay will be Mitsubishi brand (Japan),Other parts will be China well-known brand. Power is three-phase four-wire system，440v,50hz.
Saler Company Information
