Silicon Rubber Heating Pad with Digital Display Temperature Controller
Silicon Rubber Heating Pad with Digital Display Temperature Controller
  • Seen : 109 View

0
Silicon Rubber Heating Pad with Digital Display Temperature Controller

Silicone rubber heating pad is a kind of thin film which heaters upon electrified, in a standard thickness of 1.5mm, adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.

The specifications:

1. lnsulation material temperature: 250 ° C
2.The use temperature: 200 ° C
3. Insulation resistance: ≥5MΩ
4.Pressure strength: ≥ AC1500V/5S
5.Power deviation: ± 8%
6.Voltage range: 1.5-380V

7. Unit power: 1.5W / CM2.

Note: the length can be customized according to customer requirements, the width is not more than 1.2 meters, if more than 1.2 meters can be spliced, size, voltage, power, and installation method can be customized according to customer needs.

Main Features

1. Maximum temperature resistant of insulation : 200 ℃
2. Best continuous working temperature as 150 degree, max temperature as 230 degree momentarily.
3. Power deviation: 8% insulation resistance: >= 5MΩ
4. Compressive strength: 1500V/5s
5. Standard dimension: width: 20mm-1000 mm; Length: 25mm-1000mm; lead wire length: 200mm.
6. Fast heat diffusion , uniform heat transfer , directly heat objects on ; high thermal efficiency , high strength , long service life ,work safe , uneasy for ageing.

Applications

1. Silicone rubber band heater can be used in damp, no explosive gas atmosphere, industrial equipment pipelines, heat preservation for can and barrel.
2. It can be used as a frozen prevention, air conditioner compressor, assisting heating of electrical equipment.
3. Also it can be used as medical equipment and medical care (such as blood tube heater, blood analyzer

Saler Company Information

Company : Heat Founder Group Co., Ltd
Mobile : 008613311944786
Phone : 00862122810889
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Silicon Rubber Heating Pad with Digital Display Temperature Controller

Silicone rubber heating pad is a kind of thin film which heaters upon electrified, in a standard thickness of 1.5mm, adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silastic heater can be fabricated in varies shapes and powers.

The specifications:

1. lnsulation material temperature: 250 ° C
2.The use temperature: 200 ° C
3. Insulation resistance: ≥5MΩ
4.Pressure strength: ≥ AC1500V/5S
5.Power deviation: ± 8%
6.Voltage range: 1.5-380V

7. Unit power: 1.5W / CM2.

Note: the length can be customized according to customer requirements, the width is not more than 1.2 meters, if more than 1.2 meters can be spliced, size, voltage, power, and installation method can be customized according to customer needs.

Main Features

1. Maximum temperature resistant of insulation : 200 ℃
2. Best continuous working temperature as 150 degree, max temperature as 230 degree momentarily.
3. Power deviation: 8% insulation resistance: >= 5MΩ
4. Compressive strength: 1500V/5s
5. Standard dimension: width: 20mm-1000 mm; Length: 25mm-1000mm; lead wire length: 200mm.
6. Fast heat diffusion , uniform heat transfer , directly heat objects on ; high thermal efficiency , high strength , long service life ,work safe , uneasy for ageing.

Applications

1. Silicone rubber band heater can be used in damp, no explosive gas atmosphere, industrial equipment pipelines, heat preservation for can and barrel.
2. It can be used as a frozen prevention, air conditioner compressor, assisting heating of electrical equipment.
3. Also it can be used as medical equipment and medical care (such as blood tube heater, blood analyzer

Saler Company Information

Company : Heat Founder Group Co., Ltd
Mobile : 008613311944786
Phone : 00862122810889
More Information : View
Online order registration form