- Seen : 367 View
HP10 silicon piezoresistive pressure core is the core component of pressure sensor and pressure transmitter. As a high performance pressure sensor, it can be easily amplified and assembled into the transmitter of standard signal output.
HP10 core body is diffused silicon pressure sensitive chip packages to the 316 l stainless steel shell, plus pressure by sealed inside stainless steel diaphragm, silicone oil, is passed on to the sensitive chip sensitive chips don't direct contact with the measured medium, pressure measurement of all solid state structure, so the product can be applied to various occasions, including harsh corrosive medium environment.
HP10 core adopts o-ring for pressure sealing, easy to install.The company can also undertake special customization according to the needs of users, such as all-welded structure, wide temperature compensation, high reliability, strong impact and vibration resistant pressure sensors, especially for national defense weapons and equipment.
Features
Constant current and constant pressure excitation are optional
High reliability inlet pressure chip
Wide temperature compensation
You can normalize the output
Compensation plate pouring moisture-proof protection
19 mm Φ OEM standard
All 316 l material
High performance, all solid state, high reliability
Technical Parameters
Measuring Medium: Liquid, Gas compatible with SS316L
Pressure Range: -100kPa...0~10kPa...100MPa
Pressure Type: Gauge, Absolute or Sealed Gauge
Excitation: Constant current recommended 1.5mA;Constant voltage recommended 10VDC
Input Impedance: 2kΩ~5kΩ(Constant Current); 3kΩ~18kΩ(Constant Voltage)
Electrical Connection: Gold-plated corvette pin or silicone soft wire
Compensation Temperature: Constant current 0~60℃(≤35kPa), -10~70℃(other range); Constant voltage -20~85℃
Operating Temperature: -40~125℃
Storage Temperature: -40~125℃
Insulation Resistance: ≥200MΩ, 250VDC
Response Time: ≤1ms(>90%FS)
Vibration Resistance: 20g(20~5000Hz)
Impact Resistance: 100g(10ms)
Saler Company Information
