- Seen : 218 View
■Matters needing attention
■Before installing the lighting fixtures, please read this instruction manual carefully.
■The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.
■Lamps should always be installed or replaced carefully.
■Please check the local voltage in accordance with the product requirements before installation.
■Revamping only can be done when the power is off and the lamp is completely cooled down.
■When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.
■Don't cover the fixtures with flammable materials.
■Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.
■Temperature Characteristics T-ambient 25℃
Temperature
Operating -20~+55℃
Storage -40~+60℃
■Electrical Characteristics
Input Voltage:AC100-240V
50/60Hz PF:>0.9
Power Efficiency:≧0.90
1.Features
■IP66 waterproof/dust proof/explosion proof/IK09
■Aluminum shape good at heat dissipation It can also be installed vertically
■Philips SMD 3030/ 5050/ Ra>70/SDCM<6
■100,000 times switching cycle before failure
■Total harmonic distortion(THD)<10%
■Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage
■Pass 3G vibration test
2.Application
Garden light
It is mainly applied to branch road, factory, school, garden, various residential communities and courtyards. The installation height is 4-10m and the installation torque is 16Nm.
Saler Company Information
