Art and crafts mold
  • Seen : 275 View

0
Art and crafts mold

Mold silicone rubber (resin industry) consists of two components A and B, A and B are liquid. After A/B is mixed evenly in A certain proportion (weight ratio), the silica gel is brushed or poured on the prototype of the product to be reworked. The mold can be completely cured at room temperature (25℃) for 4-8 hours. It is recommended that the mold be put into use after 24 hours. At this time, the performance of all aspects of the mold is relatively stable and the effect will be better
Product Features
The mould has the properties of acid and alkali resistance, aging resistance, low shrinkage resistance to deformation, high temperature resistance, good tear resistance and so on. It is widely used in turning over and mould making of resin industry products.
Usage Method
1. After A and B are poured into the container in A certain proportion, use an electric drill or A stirring rod to mix them well. The bottom and walls of the container must be scraped well to make sure that the silica gel is mixed well with the curing agent.
2. After the silica gel and curing agent are stirred evenly, there is an early operation time of 20-30 minutes. If there is a vacuum machine, the exhaust bubble can be carried out, and the vacuum time should not be too long.
3. Generally, when pouring or brushing molds for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype, and remove all the bubbles of rigidity (to ensure that there are no bubbles in the contact surface between silica gel and the prototype). When the colloids are semi-crosslinked, secondary or multiple pouring or brushing should be carried out.
4. If the film mold is made, it is usually made of fiberglass or plaster mold for protection.
5. The mold can be completely cured after 4-8 hours at room temperature. In order to achieve the best effect, the mold should be placed for 24 hours before use.
6. For prototype products with fine patterns or containing silicon materials, it is better to use mold release agent

Saler Company Information

Company : BEIJING DINGYE INDUSTRY AND TRADE CO., LTD
Phone : 008613701197193
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Art and crafts mold

Mold silicone rubber (resin industry) consists of two components A and B, A and B are liquid. After A/B is mixed evenly in A certain proportion (weight ratio), the silica gel is brushed or poured on the prototype of the product to be reworked. The mold can be completely cured at room temperature (25℃) for 4-8 hours. It is recommended that the mold be put into use after 24 hours. At this time, the performance of all aspects of the mold is relatively stable and the effect will be better
Product Features
The mould has the properties of acid and alkali resistance, aging resistance, low shrinkage resistance to deformation, high temperature resistance, good tear resistance and so on. It is widely used in turning over and mould making of resin industry products.
Usage Method
1. After A and B are poured into the container in A certain proportion, use an electric drill or A stirring rod to mix them well. The bottom and walls of the container must be scraped well to make sure that the silica gel is mixed well with the curing agent.
2. After the silica gel and curing agent are stirred evenly, there is an early operation time of 20-30 minutes. If there is a vacuum machine, the exhaust bubble can be carried out, and the vacuum time should not be too long.
3. Generally, when pouring or brushing molds for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype, and remove all the bubbles of rigidity (to ensure that there are no bubbles in the contact surface between silica gel and the prototype). When the colloids are semi-crosslinked, secondary or multiple pouring or brushing should be carried out.
4. If the film mold is made, it is usually made of fiberglass or plaster mold for protection.
5. The mold can be completely cured after 4-8 hours at room temperature. In order to achieve the best effect, the mold should be placed for 24 hours before use.
6. For prototype products with fine patterns or containing silicon materials, it is better to use mold release agent

Saler Company Information

Company : BEIJING DINGYE INDUSTRY AND TRADE CO., LTD
Phone : 008613701197193
More Information : View
Online order registration form