Protection system around microphone wires
- Seen : 805 View
Protection system around microphone wires
Another way of protecting the new and efficient peripheral protection is by protecting the microphone or flexi-guard wires. The difference with this type of protection with electric fence is that in the event of an invader attacking, cutting off or destroying the protection area, the counter and deterrent is just ordinary fence or ordinary wall instead of this system for protecting all types of fences. It is specially designed to raise and cut the design, identifying its exact type and exact location and precisely identifying it, thereby communicating the risk and its coordinates fully and accurately to the operator or relevant agents. .
Depending on the sensitivity of the protection zone, it is possible to use both electric fence and microphone wires at the same time, which will increase the detection power of the protection system along with its high inhibitory capability. Depending on where the microphone wires are installed and mounted, this type of protection is divided into two categories.
Specification:
Installable on existing fencesHigh detection coefficientAbility to communicate with security systems including CCTV systems, Access ControlEasy maintenanceDetecting conflicts caused by cutting and climbing fence and demolitionNetwork communication capabilityAutomatic control of environmental conditions
Automatic control of environmental conditions:
All analysts have an automatic environmental control section that automatically adjusts the analyzers in adverse weather conditions. This is done for the optimum performance of the analyzers, by sensing the signals generated during the fence due to wind and rain.
Flex Guard System:
The Flex Guard system is built on RS485 data communication. The analyzers will be connected to the central computer in the control room via the RS485 communication port. Alarms are displayed on the site map and all zones can be controlled this way. System design can be tailored to customer needs.
Closed Loop System Flexi Guard:
In this system the output signal of an analyzer is returned to the system input. A unique and unique system is created that even if the sensor cable is disconnected, it still accurately identifies the points of conflict. Using the two-way (dual-sided) signal processing technology, the Flexi Guard analyst delivers the maximum security level achieved by the sensor cable.
The Flex Guard Sensor Cable is mounted on a fence at the top and bottom surfaces in the form of a circular path that cuts through the cable, eliminating the possibility of detecting conflicts and remaining in the area until the cable is repaired.
Flex Guard System Parts:
1- Central Alarm Control Unit (ACU)
The unit is responsible for processing the information received from the analyzers. Each microprocessor control and alert unit is capable of processing input information from 16 different channels at one time. Alarm and RS485 control units and alarms have the ability to connect to each other, making it possible to create a standard, circular network that can be used by other network systems.
2- The central computer
The central navigation system is capable of processing information up to 256 ACUs and provides easy-to-use planning and user interface based on screen-based images.
3. Flex Guard sensor cable
This cable is the most sensitive and accurate sensor in the market designed by APS for unique performance and for use in the surroundings.
Other sensor cables, such as magnetic cables and fiber optic cables, are available in the market, but suffer from a shortage in performance due to their type. The way they work is that they either have to be in a magnetic field or an optical fiber cover and produce a signal due to vibration or vibration, which is the weakest type of performance for sensor cables.
Saler Company Information
No comments have been posted yet
Your comment has been sent
