- Seen : 748 View
Controller
High voltage medium voltage
BORNA Medium Voltage Variable Frequency Drives
(BORNA-MegaDrive)
Today, about 50% of the world's electricity consumption is related to electric motors. Since the permanent performance of these motors is not always desirable, it can be used On the other hand, in addition to ensuring better performance, they also consume significantly more energy Lowered.
Therefore, the BORNA-MegaDrive MegaDrive device with precision control over medium voltage motors and High power can greatly reduce power consumption and operating costs of these engines .
Megadriva Borna in the voltage range of 1 to 2 kV and in the range of 200 to 15,000 kV Watts can be produced and delivered.
Features of Megadrive Borna
High reliability: Generally fluid control in a process using remote control, Higher reliability than traditional methods such as using mechanical valves and turbines Has.
Energy Saving: Because of the reduction of far in most cases, it reduces consumption Energy gets into the motor, use of remote control device, save energy consumption Will follow. Due to the significant consumption of engines in many heavy industries such as oil and gas , Cement, water and wastewater ..., the use of megadrive can dramatically reduce costs With power consumption.
Very Low Maintenance Requirements: What is in most industries, especially the oil industry Gas is very important, it is the continuous operation of the system. Megadrive Borna is designed to require very minor maintenance and maintenance If some errors occur, it can continue to work with reduced capacity. However, fluid control valves require regular periodic maintenance They put a lot of money into the system.
Extremely low pollution: Using gas turbines to rotate compressors, noise pollution and bio They will have many environments, which is a big problem in populated areas River. The Megadriva Borna device has very little noise pollution and does not pollute the air at all .
Reduce Diameter and Startup Flow: Using MegaDrive Borna, Engine Startup Flow to 10% The rated current is reduced and as a result the power supply of the station and the power supply are purchased It can be equal to the power of the motor and does not need to be purchased, which reduces the cost Initial project.
Soft motor start and power factor correction: If using remote control device to start It eliminates the use of large motors, high current flows, and mechanical and thermal stresses . This will limit the frequency of engine disconnection and possible damage to the insulator The engine rating is raised and as a result the engine life is increased. Also using synchronization logic, several motors can be controlled with one remote control Start working. On the other hand, using phase shifters and power modules circulated together, Increases the overall power factor of the device to more than 0.95.
Saler Company Information
