- Seen : 400 View
When the humidity of the main natural gas line is high, the dryer is then fed into the system to increase the working efficiency and to avoid the introduction of wet gas into the compressor and subsequently the car capsule.
Construction of the driver with a capacity of 8000 Nm3 / hr) with different input pressure will be done on request.
Driver: (Air Dryer)
The air required in industrial units often must be free of moisture. To achieve this purpose, a device called a dryer is used.
There are various equipment for removing compressed air moisture that use different methods. The most common methods for reducing and removing moisture are air drying with moisture-absorbing materials and cooling.
Adsorption Air Dryer
Absorption drives are used to increase the quality of compressed air used in some industries such as pharmaceuticals, chemicals and also to supply the air required for instrumentation equipment. The equipment has 4 turrets containing moisture absorbent material and performs the drying operation by adsorbing. In this equipment, when one of the turrets performs compressed air drying operations, the other turret recovers the absorbent material.
Refrigeration Air Dryer
Refrigeration drivers remove the moisture in the air as water droplets by cooling the compressed air to 2 ° C and distillation. Air cooling, in addition to reducing humidity, makes consumer-friendly, temperature-sensitive systems use better quality air and have a longer service life. Outlet air from a 2 ° C dew point is suitable for a wide range of industrial applications.
Saler Company Information
