- Seen : 307 View
Do you know the uses of emergency shower and eye wash?
The use of this type of shower in laboratories and laboratories is very necessary because chemicals and toxins may come into contact with the eye or the gas emitted from them may harm the eye. Emergency eye wash solved this problem.
Wash your eyes
The use of safety equipment in laboratories is one of the most essential tasks that must be done. Every laboratory and laboratory is required to use this type of safety equipment.
Safety showers and eye wash stations serve as first aid stations in emergencies
Use it when the person is exposed to harmful and corrosive substances or chemicals.
Access to such equipment is an opportunity to wash away harmful substances,
Greatly minimizes the damage or injuries caused by exposure.
Facilities or industries that may require a safety shower, such as an eye wash station, include:
Oil refineries and oil
Hazardous chemical storage facilities
Battery charging facilities
High dust environments such as granular elevators
University and high school laboratories
Hazardous waste disposal areas
People who work in the above facilities and industries have to work with hazards and harmful substances every day of the week.
These workers are given complete training on how.
To do their daily work by industry experts.
But we should not neglect "manpower". Some of the reasons that can lead to human error are: a person may not have followed certain protocols and operating procedures to perform a task, or a person may not have the appropriate protective equipment. Not worn. Simply put, no amount of training can eliminate human error otherwise there will be none
Accidents in this type of dangerous environment, which is certainly not the case. In fact, it doesn't matter if a lot of precautions have been taken or how much training has been provided - accidents can still happen.
Fortunately, Honeywell has a wireless solution that is very easy to implement
Some of the main solutions are:
The system implements the alarm so that people are in close proximity to it
Safety station, including factory manager, immediately
Notified when the safety station is activated
Implements an electronic monitoring system that allows data entry into the system
Provides connectivity to smart devices such as Logic Programmable
Controllers (PLC), human machine interfaces (HMI), servers and so on.
When it comes to worker safety, we specialize when we can use emergency shower and eye wash and eye wash stations. This is not just about the final product.
Made with a corrosion-resistant outer jacket (GRP) to protect the inner tubes and the stainless steel agent valve that has a long life and is suitable for indoor or outdoor use. Designed for ease of identification is very visible. Suitable for dangerous or non-dangerous areas. Suitable for temperatures from 40 degrees Celsius to 60 degrees Celsius.
Browse maintenance recommendations
Test the proper operation of the eyebrow and shower units on a weekly basis.
Perform annual cleaning, inspection and conformity assessment for each emergency unit.
Keep tanks and mechanical parts clean and fluid, including internal inspection of items such as immersion heater elements.
Make sure that each unit is properly labeled for location documentation and test requirements.
Make sure all personnel know where the emergency equipment is located.
Make sure all personnel are trained on how to use the emergency room.
Make sure personnel are fully aware of the potential hazards of working with them, including restrictions on exposure and work when contaminating clothing and body.
Emergency eye washes and showers should be installed in work areas where there is a high potential for accidents due to the absorption of corrosive, irritating or toxic substances through the skin and eyes.
The surroundings should be well lit and have clear signs.
The location of an emergency shower should not exceed 10 seconds for a casualty to reach. This is approximately 17 meters.
Where detectives work with highly hazardous materials, an emergency room should be set up immediately in the vicinity of their workplace.
Examine existing hazards
A comprehensive risk assessment should be performed for any organization seeking to upgrade or adapt new emergency shower facilities. Important points to consider include:
Do not settle just because of the price of the products. Make sure the quality and performance of the unit is right for your needs and the needs of your staff.
Saler Company Information
