- Seen : 468 View
mesh is produced in two forms of fine mesh and large mesh from simple and ribbed round bars.
Mesh:
To produce mesh mesh, the 6.5 coils are first stretched and converted to a diameter of 2 mm to 4 mm. The 2 to 4 mm coils are converted into 1 to 3 meter rebars by branching machines, then the rebars are placed on top of each other in a square shape and welded in a point-by-point manner.
Coarse mesh:
It is simple and forced.
Simple mesh:
A simple mesh produced from 6.5 coils, first the 6.5 coil is stretched to drop their shell, then it is turned into 6-meter and 2-meter branches by a pruning machine. The 6-meter and 2-meter branches are placed longitudinally and transversely (square) on top of each other and then welded point by point.
Ribbed mesh:
Which is produced from rebars with a diameter of 8 mm to 14 mm. The rebar is 12 meters long, first converted to 6 meters and 2 meters by branching machines, then placed on top of each other squarely and welded point by point.
Saler Company Information
