- Seen : 545 View
Ventilators and forward centrifugal blowers
Ventilators and blowers for utility centrifuges (SWSI, DWDI) are one-way and two-way (for various uses: air conditioner and air tower) (with screw) are made according to the design of COMEFRI and NICOTRA Italy.
Consumables of ST-37 galvanized blade are high quality exterior and are covered with two coats of high quality industrial paint resistant to atmospheric and corrosive factors of gases. Transmission of engine power to the impeller is monetary and belt or direct.
These fans (dwdi, swsi) are available in 19 different models with a diameter of 10-60 inches with a capacity of 150,000-100 cubic feet per minute for a working pressure of 4-0 inches of water column.
All impellers are made of galvanized sheet, which is completely statically and dynamically balanced by an all-computer device.
In these fans, the impeller is placed inside a special screw for all galvanized.
In the actuator part (engine, pulley and belt), a suitable chassis is installed, which uses a shock absorber under the engine.
All devices are made of ST-37 galvanized material, which is completed with a special industrial paint for its coating, which can be made with stainless steel nozzle upon request.
The electric motors used by Motogen or Arian Sanat are IP54 with IP-54 and F classes. (External motors will be used if requested by the buyer)
Consumer bearings are Japanese type, original brand FYH.
Consumption shaft of CM-45 transmission is two original polishes of Yazd.
The pulleys are made of high quality cast iron with special cut and perfectly balanced.
Consumable belts are spun yarn.
All fans are made by Hamoon Air Conditioning Company, which are statically and dynamically balanced according to ASHRAE AMCA standard 1985-51.
All ventilation connections are galvanized bolts and nuts.
The motor, pulley, belts and bearings of the devices have a special compartment for protection against rain and moisture.
Upon request, they will be equipped with metal or aluminum damper in the dam and the protective net in the dam and suction.
Centrifuge blade:
Types of one-way and two-way forward impellers for various uses (air conditioner and airwashing tower) according to the design of Niko Travo Camphry of Italy and Bari Boulevard of America, which are completely statically and dynamically balanced with the device and is one of the important and massive products of this factory. they give.
Saler Company Information
