- Seen : 222 View
Ventilators and radial utility centrifugal fans and blowers (0 to 22 INCH H20)
Ventilators and blowers of utility centrifugal radial type SWSI unilateral (with screw) are made according to the design of NEW YORK BLOWER USA. .
Also, these fans have flanges in the suction and suction parts. The transfer of engine power to the impeller is in the form of money and belts or directly.
These fans are available in 15 different models with a diameter of 14-85 inches with a capacity of 400-90000 cubic feet per minute for a working pressure of 0-22 inches of water column.
All impellers are made of galvanized sheet, which is completely statically and dynamically balanced by an all-computer device.
In these fans, the impeller is placed inside a special screw for all galvanized.
In the actuator part (engine, pulley and belt), a suitable chassis is installed, which uses a vibration damper under the engine.
All devices are made of ST-37 galvanized material, which is completed with a special industrial paint for its coating, which can be made with stainless steel nozzle upon request.
The electric motors used by Motogen or Arian Sanat are IP54 with IP-54 and F classes. (External motors will be used if requested by the buyer) Japanese-type consumer bearings are of the original FYH brand.
The drop in consumption of Transmission CK-45 is two original polishes of Yazd.
The pulleys are made of high quality cast iron with special cut and perfectly balanced.
Consumable belts are spun yarn.
All fans are made by Hamoon Air Conditioning Company, which are statically and dynamically balanced according to ASHRAE AMCA standard 1985-51.
All ventilation connections are galvanized bolts and nuts.
The motor, pulley, belts and bearings of the devices have a special compartment for protection against rain and moisture.
Upon request, they will be equipped with metal or aluminum damper in the dam and the protective net in the dam and the dam.
Saler Company Information
