- Seen : 406 View
Airwasher
Ventilators are made in two types: single zone and double zone.
Air washers are made in a variety of standardized models without capacity limitation, and pressure drop.
Devices in two models:
With galvanized body and by connecting the sheets to each other.
Or they are made of pillars with aluminum columns and all-galvanized metal columns as single-walled or double-walled with thermal insulation.
All galvanized sheets and profiles used have a suitable coating. And it is covered with two coats of high-quality industrial paint resistant to weathering and corrosion of gases.
The connection of the body components to each other is entirely by bolts and nuts, which are used for proper sealing between the tires.
Types of centrifugal fans (Backward, Forward, Airfoil) Two-way made by this factory, all of which are statically and dynamically balanced by a computer device are used according to the type of choice.
The connection of the actuator part (impeller, motor) to the body of the device is done by the anti-vibration and tarpaulin to prevent unnecessary noise and excessive vibration.
Ability to install and manufacture all types of fin plate, spiral coils for cooling and heating inside air washers.
Ability to embed a variety of filters for various uses such as aluminum, bag, honeycomb, Ulpa, HEPA with a suitable chassis for easy replacement and inspection.
The devices are equipped with fresh and return air inlet dampers and air-mixing box and, if necessary, outlet dampers, which can be made into two types of airfoil, flat in terms of blade type and in two types of Apposed and flat in terms of how the blades are placed. Be.
It should be noted that the power transmission of these dampers can be made in two types of gears and axial.
Glass inspection doors are installed in different parts in such a way that service and maintenance operations such as changing parts, lubrication, lubrication, cleaning and inspection can be done easily.
All parts of the device are covered with layers of zinc-rich paint and special industrial paint.
Hot and steam coils, cold water and DX of this company can be made in two types of pipe diameters as 8.3 and 8.5 inches and density of 8 to 14 fins per inch.
The pipes are made of copper and the fins (on request) are aluminum and copper.
The fins are of the STAGGERED type and the pipes are completely thermally connected to the fins by mechanical EXPAND.
The electric motors used by Motogen or Arian Sanat are IP54 with IP-54 and F classes. (External motors will be used if requested by the buyer)
Consumer bearings are Japanese type, original brand FYH.
Consumption shaft of CM-45 transmission is two original polishes of Yazd.
The pulleys are made of high quality cast iron with special cut and perfectly balanced.
Consumable belts are spun yarn.
All fans are made by Hamoon Air Conditioning Company, which are statically and dynamically balanced according to ASHRAE AMCA standard 1985-51.
This company has the ability to make all kinds of ventilators, such as horizontal, vertical, high-rise women, etc.
The water distribution pan is made of galvanized or steel (upon request) from a 2.5 mm thick sheet, the body is made of 1.5 mm sheet. The outside is painted.
The drippers are made entirely of galvanized material, which due to its precise structure prevents water droplets from passing to other parts.
The water distribution nozzle and the washing nozzle of these ventilators are of the plastic centrifuge type, which is specific to this company. Replacement or service of all parts inside the saline air is easy and is done easily.
Saler Company Information
