- Seen : 329 View
Ceiling fan coils without cabinets have the following parts and equipment:
1. Electrophone: They have the task of circulating air. The fans can be made of polymer or galvanized or aluminum forwards and installed on the devices. The engine of the device is usually several revolutions.
2- Joint heating and cooling coil: It is responsible for transferring cold and heat load to the circulating air.
3- Filter: Depending on the working standard of the manufacturers, it is produced of aluminum or non-metal type.
4-Body: Made of hot-dip galvanized sheet with suitable thickness
The best specifications of fan coils:
The best fan coil device must have the following conditions:
1- Joint heating and cooling coils should be produced with high quality and it is better with 3/8 ”size pipes with suitable circuit so that the water pressure drop is in the range of 1 ~ 4 FT-WG and the air passage speed is in the range. 200 ~ 350FPM and has the ability to provide cold and heat load.
2. The fans used should have static and dynamic balance.
3- The internal structure and bodies should be such that they do not make noise during the operation of the device.
4. Easy access to internal elements.
5. The sound level of the device during operation is low and in the range of 45 ~ 55 db.
6- The body insulation should be made of elastomeric or polyethylene.
7- The tray is installed in the appropriate drawer under the coil and is insulated from below to prevent condensation. The tray should be sloping for easy drainage.
8- The electric motor has several revolutions so that it can play a suitable role in controlling the room temperature.
Ceiling fan coil without cabinets of Azarbad Ventilation Company:
Azarbad Ventilation Company, as a quality and capable manufacturer of ceiling fan coils without cabinets, has been producing and supplying fan coils since 2003.
Azarbad Ventilation Company has fully automatic fin press machines and hydraulic expanders which, using the power of its engineers and technicians, has produced fan coil coils in accordance with international standards. Fan coil coils are trained by technicians and have CERTIFICATE by BRAZING method. The coils are welded, are subjected to quality inspection by the quality control department of Azarbad ventilation factory in the material supply and construction stages, and finally under pressure and leakage test according to ASHRAE standard by hydrotest method, and if the quality is accepted, delivery to the production line. Participates.
Use of quality raw materials including copper pipe, aluminum fin, galvanized sheet, welding material and…
Use of high quality electric motors from the brands requested by the buyer
Applying technical and engineering points and observing them in designing and manufacturing devices in accordance with project conditions
Fast delivery time and extensive service provided by agents
The price is quite fair considering the quality of the material used
Provide warranty for 15 to 24 months and after-sales service for 60 to 120 months
Ability to visit and the presence of buyer representatives in the production process
Observe all the characteristics of the best fan coils
Production of the device according to customer requirements, including customization of internal equipment with the brands requested by the buyer and…
Electrostatic body paint coating with roll 7035 or requested rolls (custom)
Availability of all parts in the warranty and after-sales service period and quick and easy access to the company or after-sales service experts
Production of fan coils with beautiful engineering design
Production of fan coils with aluminum fin Blue fin and Golden fin
Saler Company Information
