- Seen : 574 View
Buy 123 Pomex adhesive, which is made of a high-viscosity cyano-acrylic adhesive and a 400 ml activating spray. One of the important features of this product is its very high adhesion strength, good concentration and is suitable for use on vertical surfaces. It does more and does not turn yellow or whiten and has a high rate of adhesion.
Product Applications: 123 Pumax adhesive is specially prepared and produced for gluing and repairing wooden surfaces. This adhesive is very suitable for gluing MDF, wood, lumber, rubber, most types of plastics, leather and.. This adhesive is used especially in cases where immediate connections are needed.
How to use 123 Pumax glue:
First spray the desired surface and then use the required amount of 123 glue.
A better result will be obtained if the desired surfaces are free of dust or any stains and greasy materials have been removed from it.
Get information about the concentration and type of adhesive one, two or three and use any type of cyanoacrylate adhesive for special purposes that has been produced for this purpose.
When spraying is done, after a few seconds for the spray to evaporate, place another surface on it and press the two surfaces together for about 20 seconds to complete the adhesion.
Try to protect your eyes from spray and in case of contact, be sure to wash them with plenty of water and if they do not improve, be sure to see a doctor.
Vapors emitted from chemical sprays are harmful, so it is best not to expose them. Also, do not smoke or light sparks due to the risk of ignition.
Performance of 123 adhesive compared to other adhesives:
Unlike the old and conventional adhesives that are available in the market and their main ingredient is water, cyanoacrylates are produced using acrylic resin.
The main ingredient is 123 cyanoacrylate adhesives, which is an acrylic monomer and forms a plastic after it is baked.
Adhesive 123 is completely different from other conventional adhesives on the market. The reason for this difference can be attributed to its very special bonding and adhesion conditions.
These types of adhesives can only be well bonded if the surface of the two cuts is slightly damp. However, one of the main conditions for the performance of ordinary adhesives is that the surface of objects is completely dry.
From the above it can be concluded that if the surfaces to be glued to each other are completely dry, the 123 adhesive will not be able to stick them together properly or a loose connection will be created between the two pieces.
In general, when some moisture is present when objects are bonded, the molecules present in the cyanoacrylate adhesive react with them to form a very strong chain or bond between two surfaces that are in contact with each other. The reaction between the 123 adhesive molecules and the moisture on the surfaces is accompanied by heat generation and occurs rapidly.
The type of operation and reaction method of instant adhesives or 123 is completely different from the performance of common adhesives on the market, which cause adhesion by evaporation of the base liquid.
Saler Company Information
