RO distilled water production machine
RO distilled water production machine
  • Seen : 333 View

0
RO distilled water production machine

(Water purifier with absolute purity, especially for sensitive laboratory equipment)

Reverse osmosis and nanofiltration methods are known to be the best methods in water treatment. These methods are generally used in desalination, hardening and separation of water pollutants. In addition, these methods can be used to recycle water as well as provide high purity water that is needed by laboratory diagnostic centers and hospital treatment centers. The amount of pure water consumption in the country's laboratories is very high at the moment, and water treatment equipment or pure water vials are currently being purchased from abroad. It should be noted that these methods are used to separate the salts and ions in the water, and if there are particles suspended in the water, other mechanisms must be added to the system before the ions can be separated. It is obvious that in using these methods and using them in different centers, the quality of the incoming water should be continuously measured so that their changes do not cause the destruction of the equipment, especially the treatment membranes. For example, in laboratory water treatment, the turbidity of water, TDS, organic carbon, TOC, pH and inlet water temperature must be constantly monitored. The system designed in this device has two main features, which include continuous inspection of water specifications and preparation of high purity water for the use of laboratory equipment from the urban water inlet.

In general, in this process, the following main points are considered:

Separation of suspended particles before water reaches the sensitive membranes of the device
Hardness and hardness of water to prevent calcium deposition
Pumping and adjusting the water pressure properly during the absolute water production process
Investigation of water treatment characteristics including conductivity, temperature and level of organic carbon in different stages of absolute water production
Design of parts and their location in the absolute water production cycle

Saler Company Information

Company : AratebFan
Mobile : 00989121324275
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
RO distilled water production machine

(Water purifier with absolute purity, especially for sensitive laboratory equipment)

Reverse osmosis and nanofiltration methods are known to be the best methods in water treatment. These methods are generally used in desalination, hardening and separation of water pollutants. In addition, these methods can be used to recycle water as well as provide high purity water that is needed by laboratory diagnostic centers and hospital treatment centers. The amount of pure water consumption in the country's laboratories is very high at the moment, and water treatment equipment or pure water vials are currently being purchased from abroad. It should be noted that these methods are used to separate the salts and ions in the water, and if there are particles suspended in the water, other mechanisms must be added to the system before the ions can be separated. It is obvious that in using these methods and using them in different centers, the quality of the incoming water should be continuously measured so that their changes do not cause the destruction of the equipment, especially the treatment membranes. For example, in laboratory water treatment, the turbidity of water, TDS, organic carbon, TOC, pH and inlet water temperature must be constantly monitored. The system designed in this device has two main features, which include continuous inspection of water specifications and preparation of high purity water for the use of laboratory equipment from the urban water inlet.

In general, in this process, the following main points are considered:

Separation of suspended particles before water reaches the sensitive membranes of the device
Hardness and hardness of water to prevent calcium deposition
Pumping and adjusting the water pressure properly during the absolute water production process
Investigation of water treatment characteristics including conductivity, temperature and level of organic carbon in different stages of absolute water production
Design of parts and their location in the absolute water production cycle

Saler Company Information

Company : AratebFan
Mobile : 00989121324275
More Information : View
Online order registration form