- Seen : 344 View
Metal cooling tower or cross-flow cubical galvanized cooling tower of Mehtab Gostar Company is built according to American cooling tower standard in capacities of 10 to 1200 tons of refrigeration.
Metal cooling tower or cross-flow cubical galvanized cooling tower is manufactured by American Marley type.
The body of the cross-flow cubical galvanized cooling tower is made of high-quality Indian galvanized material with a coating of Polyamide epoxy paint, mastic primer (industrial bitumen).
The connection of the whole body of the metal cooling tower or cross-flow cubical galvanized cooling tower and different parts of the cross-flow cubical galvanized cooling tower is made by hot-dip galvanized nut bolts.
One of the most important advantages of Mehtab Gostar galvanized non-cooling tower is the use of Siemens 55 IP electric motor with the highest efficiency.
The design of the electric motor in the Marli cooling tower of Mehtab Gostar Company is such that the electric motor of the cross flow cubical galvanized cooling tower is protected by the cap against heat, moisture, rain, and snow, and no damage is done to the electric motor.
The water spraying system of the cubical galvanized cooling tower is such that it does not have any wear and tear and is exempt from the water distribution system of ball bearing sprinklers and square spray nozzles, and its spraying system is a water spreader model and there is no sedimentation in it. It doesn't have, and the water dispenser system of the cooling tower is designed in such a way that the steps of the water dispenser are observed and it distributes the water drop by drop in the best way.
Foley and flake and bearings of Marli cooling tower of Mehtab Gostar company are TOUO type of Japan. Also, the packings inside the cooling tower are galvanized cubes of velvet wood from Russia and Finland, which have cooling properties and are 10 mils thick and are placed inside the cooling tower with a suitable step, and are enough to clean the wood, the elminator part (input wind) easily opened and cleaned the sticks and then placed them inside the cross-flow cubical galvanized cooling tower and reused.
In order to determine the capacity of "cooling tower", including fiberglass cooling tower, galvanized cooling tower, wooden cooling tower and concrete cooling tower Marli, also inquire about the price of cooling tower or cooling tower, which in English is called cooling tower. You can contact our experts.
The propellers in the cross-flow cubical galvanized cooling tower are multi-wing polyamide with W-type anti-moisture, anti-heat, anti-precipitation and high rainfall, which remove the heat and humidity inside the cubical galvanized cooling tower in the best way, which is cool. Watering has a great effect.
The eluminator system is designed to prevent the wastage of water and the wind enters the cooling tower in the best way and has a great effect on cooling the water.
Just as the fiberglass cooling tower was a type of cooling tower, the galvanized cooling tower is another type of cooling tower.
Checking the general features of the galvanized cooling tower:
Suitable for outdoor installation (Out Door)
Available in 6 product models
Galvanized body
Can be provided in capacities of 15 to 75 tons of nominal refrigeration
Can be provided with propeller type fans
suitable for working with water-cooled compression chillers
Can be provided as assembled in the factory
It has a power transmission system and a belt (Belt Drive).
With protection of rotating parts
Saler Company Information
