Tractor back shovel, which is also known as backhoe or tractor back shovel, is a very useful tool for digging. This shovel is mostly installed on a tractor or backhoe loader. Arak Machinery Company with more than 12 years of experience in the field of manufacturing all types of rear shovels for various tractors such as Ferguson models 399, 475, 485, 285, 299 and 800 single and double differential, New Holland, Londini, Romania, El S, John Deere, Zetor, etc. in two fixed and sliding models with 4 hydraulic locks, which in the sliding model has the possibility of engraving on the side of the wall.

This company has always tried to improve the quality and efficiency of this product over the past years. And the result of this effort, as well as the use of the world's most recent technologies in its construction, is the new Daghegh rear shovel, which we will examine its features in the following.
Backhoe features minutes

The digging depth is 3 meters and the access length is 5.5 meters
It has 3 replaceable standard bucket models (width 40, 50 and 60 cm).
Industrial two-component epoxy paint used
Full coordination of the shovel with the tractor due to the installation of the chassis on the tractor
With a rotating chair for the operator
The ability to install picor (hydraulic hammer) up to 400 kilos, in which case the shovel can also be used as a stone crusher.
It has a 9-piston Turkish pump with high efficiency and the ability to support the front shovel (customized)
Use of St52 alloy sheet in shovel production
It has an advanced unloading and loading system, in which case the bucket is fully assembled and prevents soil from falling inside the bucket. Also, this mode increases work efficiency due to the volume of soil removal.
All hoses are closed by the company itself, which reduces oil leakage to zero.
The use of German Zimmerit (Kastash) sealing equipment
All the pins are made of Ck45 (shear steel) and are fully fit and without any looseness.
All shafts are repairable and beveled nuts that do not loosen in any way during operation. In addition, the presence of a groove on the shafts makes it easy to grease.
Using corner nails (for full adhesion to the wall) and made of anti-wear forged steel

The unique feature of jacks

The back shovel of Dagagh tractor brings the highest efficiency and convenience to the operator by using 11 double-sided and two-pressure hydraulic jacks. These jacks are fully controlled by three multi-movement Italian joysticks in the cabin (if there is a cabin). The presence of a pulley in the jacks causes all the deviations of the structure to be caught and prevents the jack from being damaged. Also, the existence of this option helps the accuracy of the jacks movement. Another advantage of these jacks is the presence of reinforced arms with a large diameter, which have higher strength due to the larger volume of oil.
The function of jacks

2 main base jacks: these two jacks place the chassis bases on the ground during work and raise the tractor with rear pressure. And with this, it takes the pressure off the tractor and tires.

Jack stick and jack bucket: which drive the bucket to dig the soil.

Boom jack: which adjusts the height of the shovel.

2 steering jacks: which are responsible for moving the entire shovel to the left and right and enable the shovel to rotate 180 degrees to the sides.

4 stabilizing jacks: which are responsible for fixing the shovel to the chassis in a balanced way.
Custom shovels

Arak Dagheeq Machinery Company, relying on many years of experience, using up-to-date knowledge and using specialized machines, as one of the pioneers of the agricultural implements industry in Iran, is ready to design and produce customized front and rear shovels with different dimensions and uses. It is customers. The proof of this is the construction of front and rear shovels on different tractors, which you can see in the following pictures:

Rear shovel with telescopic boom: This shovel is used when a longer access length is needed. Like cases where it is not possible to take the tractor near the excavation site.
Installation and after-sales service of tractor rear shovel

Arak Minutes Machinery Company is ready to serve our dear customers with highly experienced and expert installers. It should be noted that these shovels are easily installed in less than an hour and ready to be delivered after testing. Also, all the necessary equipment and tools are provided by the company itself. However, for a better installation of the shovel and related equipment (considering the possible defects of the tractor itself and the possibility of needing some modifications on the tractor), it is better to transfer the tractor to the company.