Fiberglass cooling tower
  • Seen : 354 View

0
Fiberglass cooling tower

In most small and large factories, one of the most important and basic devices can be called cooling towers. In addition to water, the cooling tower is used to cool other fluids if necessary. Cooling tower
Due to the fact that the cooling tower is usually bulky and due to the splashing of water in the surrounding environment and the failure of the equipment, it is usually installed at the end of the process. If the equipment of the cooling tower is not omitted, high technology is not needed for the construction of the cooling tower, as in Iran, the construction of this cooling tower is currently being done on a large scale. Cooling towers have problems due to their specific physical and chemical conditions, but it usually takes a long time for these problems to disable the cooling tower. But it is practically unavoidable. A cooling tower is a device that facilitates evaporation by creating a large contact surface between water and air and causes rapid cooling of water. The cooling action is done due to the loss of latent heat of evaporation, while a small amount of water evaporates and causes the water to cool. It should be noted that water loses some of its heat through radiation, conduction and displacement, and the rest through evaporation.
Most of the cooling devices are made up of a closed circuit, and the water in these devices is responsible for the absorption, rejection and transfer of heat, that is, the heat generated by the machine is absorbed and removed from the device. This will make the device work more smoothly and more stable. In devices where we have to circulate or use water for some reason, the heat of the water must be removed somehow. This is done by using a cooling tower. In all factories, there are a large number of heat exchangers, in most of which water is the cooling agent.

Saler Company Information

Company : Datiskar
Mobile : 00989357887070
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Fiberglass cooling tower

In most small and large factories, one of the most important and basic devices can be called cooling towers. In addition to water, the cooling tower is used to cool other fluids if necessary. Cooling tower
Due to the fact that the cooling tower is usually bulky and due to the splashing of water in the surrounding environment and the failure of the equipment, it is usually installed at the end of the process. If the equipment of the cooling tower is not omitted, high technology is not needed for the construction of the cooling tower, as in Iran, the construction of this cooling tower is currently being done on a large scale. Cooling towers have problems due to their specific physical and chemical conditions, but it usually takes a long time for these problems to disable the cooling tower. But it is practically unavoidable. A cooling tower is a device that facilitates evaporation by creating a large contact surface between water and air and causes rapid cooling of water. The cooling action is done due to the loss of latent heat of evaporation, while a small amount of water evaporates and causes the water to cool. It should be noted that water loses some of its heat through radiation, conduction and displacement, and the rest through evaporation.
Most of the cooling devices are made up of a closed circuit, and the water in these devices is responsible for the absorption, rejection and transfer of heat, that is, the heat generated by the machine is absorbed and removed from the device. This will make the device work more smoothly and more stable. In devices where we have to circulate or use water for some reason, the heat of the water must be removed somehow. This is done by using a cooling tower. In all factories, there are a large number of heat exchangers, in most of which water is the cooling agent.

Saler Company Information

Company : Datiskar
Mobile : 00989357887070
More Information : View
Online order registration form