- Seen : 496 View
In these types of elevators, it is best to make sure that the walls are selected in such a way as to prevent contamination and that the floors and walls can be easily sterilized. Nowadays, using the Anti finger (nano material) steel sheet for interior cabinetry, can be improved. It is suggested that the door width of these lifts be at least 1 cm and the height 2 cm. A minimum cabin width of at least 2 cm and a net depth of at least 2 cm should be selected to fit the bed with a companion. The capacity of such an elevator is 2 kg (equivalent to 4 persons).
Larger flat-top lifts with capacity of 1kg (2 persons), 1kg, and 5kg are also available in the cabin in addition to the space required for the bed and cell, space for carrying some medical equipment along with the patient. Is acceptable.
Architects of the building should note that the overhead of this type of elevator reaches about 5 cm (compared to conventional elevators about 2 cm).
It is advisable to have the "right of way" control key for these lifts so that in case of emergency, staff and officials can take control of the lift. Like the passenger elevators, it is best to use sliding photocells at the entrance to the cabin, a fan for ventilation inside the cabin, and a phone or device that can make contact with the outside if the elevator is damaged.
Appropriate drainage should be used to prevent damage to the walls, depending on the location of the bed or trolley. The Extended door-open button is also very useful and functional. If there are no financial constraints, the use of "earthquake resistant" lifts is a great option.
Saler Company Information
