- Seen : 513 View
These pumps are widely used in the manufacture of high pressure sprinklers and are used for washing in various uses, including carwashes and industries.
The piston pump consists of a cylinder, a piston, a suction valve, and a discharge valve, a piston driven upward and downwardly by a handle on one side. As the piston moves upward, the outlet valve is closed due to suction and the force of flow coming back from the outlet, and due to the suction force created inside the cylinder, the inlet valve opens and the fluid is sucked into the pump chamber when the piston Moves downward, inlet closes and outlet returns, and fluid trapped in chamber and under piston pressure transmits to outlet It is found that repetition of this operation causes the fluid to move from one location to another. The cylinder must be sealed so that the liquid cannot leak out.
Specifications of post pumps:
The piston pump has a high pressure and a low discharge. Piston pumps are widely used in factories - workshops and industries. Piston pumps have different models that are classified according to their application. For example, desalination plants use steel piston pumps, and hot water post pumps (with special pincers) are used for the plant where carbonated drinks are produced. Generally speaking, post pumps are mostly made of rice and are sometimes made of aluminum.
One of the most widely used pumps is the 3-way pump that is used in the car wash and car wash industry. After this pump, the single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase, single-phase motors are the most widely used.
The post-electropump is divided into two types of Cockpit and Cockpit. Pumps that are either direct couplings or, as the so-called hallucinations are known, pumps are connected directly to the electromotor and no couplers are used. These type of direct coupler pumps are without intermediate which have higher efficiency and lower energy loss and also have less failure. In contrast to pumps that are workshop couplers because of their low customer price, it is interesting to note that if these pumps are not coupled properly, they will be damaged after some time by the pump and electromotor and the buyer will have to re-injure. Buy a similar device.
Saler Company Information
