- Seen : 582 View
Imax sand filter features
Can be used in water purification of home pools, jacuzzis and public pools
The ratio of the amount of water passing to the surface of silica and sand in the Emaux sand filter is high
More flow compared to the smaller dimensions of the Imax sand filter
The Emaux fiberglass sand filter contains less silica than metal sand filters with the same quality.
Maintenance of pool water filtration due to the high efficiency of the Imax sand filter
Imax sand filter has a resistant body made of high pressure polyethylene.
Very low weight (without silica) for the time of transportation of the device
Important tips for choosing an IMAX sand filter
The things that must be followed to choose the Imax sand filter.
The maximum temperature allowed in all Emaux sand filters should be 50 degrees Celsius because the Emaux sand filter system is sensitive to temperature increase, in this case, an electric valve and thermostat should be used on the heating lines. Otherwise, a sudden increase in temperature will damage the Emaux sand filter and reduce the life of the sand filter.
The maximum pressure considered for Imax sand filters is 50 psi. Care must be taken in choosing the relevant equipment such as a pool pump because pool pumps apply different pressures and if the pool pumps apply pressure above 50 psi, irreparable damage will be done to the Imax sand filter.
Because Imax sand filters are made of fiberglass, in case of carelessness and damage, it cannot be repaired and the entire sand filter must be replaced.
Emaux sand filter calculation
The following items can be considered to calculate the toe of the Imax sand filter
In public swimming pools, the rate of water circulation is once every 4 to 6 hours.
In private pools, the water circulation rate is once every 6 to 8 hours.
The filtration level is 15 to 20 gallons per minute (GPM) per cubic foot.
The maximum working pressure of the filtration pump must be lower than the maximum working pressure of the Imax sand filter so as not to damage the sand filter.
Emaux pool sand filters are designed and produced in four series: MFV, P, MFS and NL. Imax FRP tanks are made with the best technology in the world.
Technical specifications of Emaux P series sand filter
It is one of the most widely used sand filters of the Imax brand.
Because the body is made of fiberglass, it is highly resistant to corrosion and rust.
The maximum temperature allowed for the Emaux sand filter to work is 50 degrees Celsius.
The diameter of the silica used in the Imax pool sand filter should be considered to be 0.5 mm.
The weight of the resin used in P series Imax sand filter is from 20 kg to 210 kg.
It has a multi-way valve (five ways) and the ability to perform back wash to improve its performance
The volume of water treatment in Emaux sand filter P series is from 34.4 to 153.6 cubic meters per hour.
The size of P series connections of Imax sand filter is ½ 1 inch.
The water volume of P series is from 4.3 to 19.2 cubic meters.
The diameter of Imax P series sand filter is from 35 to 71 cm.
The height of P series Imax sand filter is from 55 to 85 cm.
It is made in China and licensed by Australia.
Emaux P series sand filter
Saler Company Information
