- Seen : 769 View
Simple Concrete Jack Crusher with Behrazan Pars Digital Display with Unique Design for Concrete Testing
Cubes with dimensions of * 1010 * 10 and 15 * 15 * 15 or 20 * 20 * 20
Cylinder specimens with dimensions of 10 * 20 or 15 * 30 cm, brick specimens, cement blocks, cement specimens, Grout specimens, etc. Can be used for compressive strength, tensile strength test, flexural strength test or shear strength test.
A brief description of the functionality of the Digital Concrete Jack Crusher Machine:
After inserting the sample into the simple concrete breaker jack with the digital display and pressing the start key, the steering control system begins to process the information by ordering the electric motor. After the power is turned on, the hydraulic system starts pumping and Hydraulic Control Valves in Digital Concrete Jack Crusher with Digital Monitor Control Oil Output Oil reaches sensors and oil pressure is measured. The oil is then pushed behind the piston and the jaws of the Simple Concrete Crusher machine are digital. It starts in less than a second The specimens move to the specimen and apply the required pressure to the specimen according to the standard. This force is applied up to the point of failure and 20% after the specimen to ensure failure. The digital display is broken and the amount of force applied at the moment of failure and the amount of stress on the display can be observed. Each of the parts of the simple digital breaker jack with the digital display must have its own specifications so that the sample testing process can be properly and thoroughly performed. be done.
For this purpose, a simple digital crusher jack with a digital display should have the features divided into 4 groups:
Loading speed
Body design
Hydraulic system
Sensors and displays
The loading speed is the most important factor in the failure of the specimens. The loading speed of the simple concrete breaker jack with digital display depends on factors such as hydraulic system, control valves, electro motor, power output from the display and so on. Digital Concrete Crusher Jack has made every effort to ensure uniform loading speed with all the factors in mind. Using high quality control valves, the use of a Tabriz Moton Company single phase electric motor , Using the micro system to control the steering wheel are such things
The body design of the simple concrete breaker jack with digital display in the form of rigidity is required and the design of sheets and welds with the required strength is used. All body design is according to the national standard of Iran. It is designed to test specimens with a height of between 3 and 30 cm. Height discrepancies are compensated with steel discs with appropriate hardness and a 40 mm course.
The hydraulic system in a simple concrete display jack with a digital display should be capable of applying the force required to test the specimens, so the use of fittings, pumps and other components must be capable of applying this force.
The sensor and monitor must be sufficiently accurate to record all changes made to the digital concrete breaker with a digital display on the specimen and to display appropriately after processing. The output information of the simple concrete breaker with a digital display includes two The first part is displayed on the screen of the concrete breaker jack as the maximum force applied in kilograms of force and the stress created in kilograms per square centimeter. The second part is transmitted to the computer by cable and after processing to Maximum stress and force diagram face can be displayed
Digital Concrete Breaker Jack with Digital Display has the following specifications:
Digital display with a resolution of 1 kn
High pressure transmitter 600 times
The distance between the two jaws is 320 mm
Contains oil level indicator
Speed adjustment screw
Capacity of 2000 kn
Contains 150 mm filler discs
Contains Micro Switch Limit Course Jack
Course Jack 40 mm
Has stress drawing software
Ability to calculate sample stress
Has computer connection cable
Steel protection on sensors and motor
With electric oscillator
Static resistant paint
Indicates the jaw movement of the device
Calibrated during construction
Has power outage in case of overload
Has a power outage system in excessive displacement
With hook for carrying
Removable jaw to align sample surface with jaw
With lever for one way oil valve
Dimensions: Height * Width * Length 120 * 48 * 70 cm
The total weight of the machine is 415 kg
It's easy to set up. As such, the four cables of the machine are each in their own form and cannot move the cables, so put each cable in place and press the stsrt key. Remember
Compressive strength test:
To perform the compressive strength test, place the specimen between the two jaws and the machine with a low-to-high axial pressure load breaks the specimen to maximize the force and stress on the monitor and the stress diagram on the computer.
Tensile strength test:
This test is performed by indirect fracturing (Brazilian method) on cylindrical specimens. This requires a piece known as the tensile mold. After placing the sample inside ah
Saler Company Information
