Gas regulator model GS-74-27 H
Gas regulator model GS-74-27 H
  • Seen : 440 View

0
Gas regulator model GS-74-27 H

GS-74-27 H model gas regulators are in the city gas regulator group for industrial and commercial use. This regulator has a higher range than GS-74-27 models in terms of gassing capacity and input pressure range.

 

Specifications:

- The operation of this type of regulator is one-way, so that it is not put into service by applying pressure from the outlet duct.

- In case of changes in the gas pressure at the input of these types of regulators, the gas output pressure always remains constant.

- If the output flow is blocked (Q=0) with the maximum input pressure, the regulator will have a normal function and the set pressure will not exceed the set value.

- With the possibility of 360-degree rotation of the diaphragm chamber compared to the main body, it is possible to install this regulator in different conditions.

In this category of regulators, 3 safety systems have been used in order to achieve the complete safety of consumers and at the order of National Gas Company of Iran.

- Gas flow cut-off system if the output pressure drops below the specified range. (LPSO)

- Gas pressure cut-off system if the gas output pressure increases above the specified range. (HPSO)

- Automatic drain valve system in case of excessive gas pressure (relief valve)

Saler Company Information

Company : Tajhizat Farasanat Arman
Phone : 00983136644734
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Gas regulator model GS-74-27 H

GS-74-27 H model gas regulators are in the city gas regulator group for industrial and commercial use. This regulator has a higher range than GS-74-27 models in terms of gassing capacity and input pressure range.

 

Specifications:

- The operation of this type of regulator is one-way, so that it is not put into service by applying pressure from the outlet duct.

- In case of changes in the gas pressure at the input of these types of regulators, the gas output pressure always remains constant.

- If the output flow is blocked (Q=0) with the maximum input pressure, the regulator will have a normal function and the set pressure will not exceed the set value.

- With the possibility of 360-degree rotation of the diaphragm chamber compared to the main body, it is possible to install this regulator in different conditions.

In this category of regulators, 3 safety systems have been used in order to achieve the complete safety of consumers and at the order of National Gas Company of Iran.

- Gas flow cut-off system if the output pressure drops below the specified range. (LPSO)

- Gas pressure cut-off system if the gas output pressure increases above the specified range. (HPSO)

- Automatic drain valve system in case of excessive gas pressure (relief valve)

Saler Company Information

Company : Tajhizat Farasanat Arman
Phone : 00983136644734
More Information : View
Online order registration form