- Seen : 1928 View
In industrial conveyor lines, it is sometimes necessary that the product is exposed to a high temperature heat process, which may be used for drying, baking, processing, or even forming and giving flexibility to the product. This is why we need conveyors with different characteristics and high thermal tolerance in any environment. It can be referred to as PTFE mesh (teflon), fusing straps (teflon flat) and metal straps (black iron, galvanized or stainless steel) as a fireproof or heat resistant strap. These products have different characteristics, each of which is suitable for the environment and the product to which they are addressed, in which the metal conveyor mesh is introduced.
The metal nets are made of woven wire, each row of which is clamped with pillars in each other, and a belt of desired length and width. The metal mesh can be made of black iron, galvanized steel and Or steel. Another important feature of the metal conveyor mesh is the mesh or the size of the mesh, which often depends on the size of the products that carry the net.
The metal conveyor mesh is divided into several general types in terms of the type of tissue.
A metal conveyor mesh of a textured layer
Double lace metal texture
Three-layer textured metal conveyor mesh
Lace and Ribbon Metal Conveyor Lace (Pittsopee Oven Frying Tiles)
Strap Conveyor Tie (using a different metal strap instead of a wire)
It should be noted that among the various types of metal nets, in terms of the type of texture, single-layer metal gratings are more economical and more common than other types, in mesh size (sizing), as well as the size of the wire, with a high variation of the mesh from 6 * 2 Millimeters up and the size of the wire is 1, 1.2, 1.5, 2, 2.5 or more.
To further thicken the mesh and make the mesh smaller, we use double or triple texture. The double conveyor mesh and three layers of texture are very dense and continuous and suitable for conveyor belts with a total diameter of less than 3 mm.
The texture, which is said to be left and right, is made of stainless steel, is most commonly used by the Pittsburgh oven and the mesh of this type is rectangular.
The belt conveyor mesh is used in a variety of thicknesses and widths of cut metal plate. This type of texture has a higher price than other types.
All the metal conveyor belts mentioned above can be mounted on metal flat rollers (like other conveyor belts), meaning that it is not necessary to use the gear to move the metal conveyor net, but the possibility of mounting the chain on both sides There they are used in this case, the fixed rollers are removed at the beginning of the line and used to transfer the power of the motor to the chain conveyor mesh from the shaft and the gears in line with the mounted chain. It is natural that the chains mounted on the sides of the conveyor belt create better motor engagement.
Saler Company Information
