- Seen : 801 View
Alvan facade acrylic paint is used for fast, beautiful painting of interior and exterior surfaces (gypsum, cement, brick, flour, cementitious, wood, etc.). This high quality paint has a very good resistance to scratches and has a good resistance to sunshine, water and alkaline penetration, and is recommended for outdoor environments, especially the facades of buildings. Washability, excellent coating strength, high drying speed, ease of application, water-thinning ability, no unpleasant odor, resistance to UV light and environmental compatibility with this color. This product is available for different applications in matte and glossy types.
Usage
The surface preparation is rinsed off with water to avoid dust. If the surface is damp, it must be cleaned b using a brush. Preferred level
Staining should be clean and free from any contamination, grease or even old paint until a reliable surface is obtained.
For cementitious surfaces, use a waterjet to clean the surface and ensure that the surface is completely dry before painting.
Application of latex sealer 3307 is required prior to painting.
Method of application 1. Mix the acrylic paint of Alvan Rasad with appropriate amount of water and apply on the surface. Water-to-color mixing depends on ambient temperature, subsurface, and staining device, but under normal coloring conditions, water-to-color mixing by weight percentage, with brush 30% - 20%, with roller 25 % - 15% and with pistol 30% - 25% (spray application is recommended)
2. Apply a layer of water-based acrylic varnish to increase the durability and durability of acrylic paint and to create a high gloss or matte surface and a more beautiful look.
ALCO-3112,3113,3114
Recommended on acrylic paint. The use of these lacquers is defined by the amount of gloss required.
It is recommended to apply paint at ambient temperatures above 10 ° C, 3 ° C above dew point and humidity below 80%.
Laundry After washing, wash hands, paint, or flooring with warm water and soap. Wash paint tools with white spirit solvent and dry immediately to prevent rusting.
SAFETY AND STORAGE Keep container contents dry, cool, and in direct sunlight, with proper ventilation. Prevent color frost. After use, close the container door tightly. The best use time is up to 30 months after the date of production if you have proper storage conditions. If swallowed or in contact with eyes (after rinsing with plenty of water), seek medical attention.
Saler Company Information
