Forged Steel Slider
  • Seen : 632 View

0
Forged Steel Slider

Gate or sliding valve The main action of a gate valve is to completely disassemble or connect the two fluid streams. This means that these types of valves must either be completely closed, or fully open, and in fact they cannot be used half open.
As the name of the valve indicates, it operates with a gate that can be moved in the direction of the fluid movement; .
Sliding valve is available in different sizes and sizes. As for the gate valves, it should be noted that they all have the same components that
Different models differ slightly in terms of type of manufacturer, but one thing to note is that all door locks generally have the same mechanism that are only structurally different.
In gate valves, the valve and pipe are usually connected by flanges and bolts and a gasket is inserted to prevent leakage between the valve flange and the pipe. Part of the slide valve located above the body and attached to the body by flanges and bolts is called a bonnet and is inserted to tighten and prevent leakage between the body and the cap. Large sliding valves should normally be closed in full flow mode, but after closing, the pressure must be adjusted by the valve system on both sides of the valve and then open.
One of the products offered to you is the beloved Forged Steel Slider, which is also available on the Aria Pajhodan Shop website.

Saler Company Information

Company : Sanat Pajuhan Arya
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Forged Steel Slider

Gate or sliding valve The main action of a gate valve is to completely disassemble or connect the two fluid streams. This means that these types of valves must either be completely closed, or fully open, and in fact they cannot be used half open.
As the name of the valve indicates, it operates with a gate that can be moved in the direction of the fluid movement; .
Sliding valve is available in different sizes and sizes. As for the gate valves, it should be noted that they all have the same components that
Different models differ slightly in terms of type of manufacturer, but one thing to note is that all door locks generally have the same mechanism that are only structurally different.
In gate valves, the valve and pipe are usually connected by flanges and bolts and a gasket is inserted to prevent leakage between the valve flange and the pipe. Part of the slide valve located above the body and attached to the body by flanges and bolts is called a bonnet and is inserted to tighten and prevent leakage between the body and the cap. Large sliding valves should normally be closed in full flow mode, but after closing, the pressure must be adjusted by the valve system on both sides of the valve and then open.
One of the products offered to you is the beloved Forged Steel Slider, which is also available on the Aria Pajhodan Shop website.

Saler Company Information

Company : Sanat Pajuhan Arya
More Information : View
Online order registration form