- Seen : 330 View
Blower pump (blower) is used in various industries (water, sewage, industrial, agricultural, etc.). These pumps are dual-axis so that each axle can be double or triple blade which is one of the features of this aeration pump.
1. Create a large volume aeration
2- Dry inlet and outlet air
3. Create aeration for more orbit
4- Controlling the flow rate (volume) with the Foil Belt Coupling to the blower volume limit
1- Oil pump control (in most of these pumps the lower part of the body is embedded)
2- Oil control in terms of oil service life and quality (most vacuum oils work 1100-1,500 hours).
3. Pump vibration control (it is best to turn off excessive vibration and monitor the following parameters as soon as it is detected)
A-Balance of axes
B-Bearing failure
C-gear failure
D-Failure to install pump properly on chassis
4- Inlet air filtration: Most users of this type of pump install filters in its air inlet (when the pump is in an polluted environment). These filters prevent any material and dust from entering the pump if not Installing the filter and entering the pump shaft contamination are out of time and cause abnormal sounds.
5. Pump Temperature Control:
The best control for the temperature is the installation of the thermocouple. Under normal conditions, the output temperature of the pump reaches 100 degrees, which does not indicate a pump failure.
Causes of elevation of pump temperature
Axle shift to cylinder pump (friction)
Failure of bearings
Gear breakdown
Low oil
Excessive compression of the outlet air pressure (which should not exceed 1000 mmB)
Input filter blockage
Use of this pump can include the following:
Wastewater Treatment Plant
Sugar industry
Silos (displacement ...)
Alcohol Industry
Paper, Cardboard, Printing
Flour industry
Aeration in fish and shrimp pools
Cement Industries
Glass industry
Dryers
Food and pharmaceutical industries
Steel industry
Painting machines
mines
Textile
Oil and Gas
And ...
Saler Company Information
