Bluedan tank
  • Seen : 537 View

0
Bluedan tank

Even after the best purification operation, the feed water inside the boiler contains some impurity; These impurities, which mainly include suspended and soluble salts in water, if they are continuously in contact with the boiler, cause irreparable damage to the boilers and reduce the efficiency of the boiler in case of deposits.

The increase of these particles causes the water to evaporate later, damages the pipes, and also causes equipment failure. In order to fight against these impurities, you can use the Bluedan tank. This system uses the kinetic or thermal energy of the steam to prevent The adverse effect of impurities and constant cleaning of the boiler.

The water on the upper surface of the boiler is usually permanently flushed and drained; While the bottom water is blued every now and then to discharge the sediments.

Improper boiler water pressure may increase energy consumption. The need for more purification operations and spending more money is another consequence of this. It should be known that the boiled water has the same temperature and pressure as the water in the boiler, so it can be used to increase the efficiency of boilers. Less water and fuel consumption, more appropriate cost of operation, reduction of maintenance and repair costs, and having clean steam with greater efficiency are among the advantages of Bludan in the boiler.

Saler Company Information

Company : Tehran Mobaddel
Phone : 00982177797779
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
Bluedan tank

Even after the best purification operation, the feed water inside the boiler contains some impurity; These impurities, which mainly include suspended and soluble salts in water, if they are continuously in contact with the boiler, cause irreparable damage to the boilers and reduce the efficiency of the boiler in case of deposits.

The increase of these particles causes the water to evaporate later, damages the pipes, and also causes equipment failure. In order to fight against these impurities, you can use the Bluedan tank. This system uses the kinetic or thermal energy of the steam to prevent The adverse effect of impurities and constant cleaning of the boiler.

The water on the upper surface of the boiler is usually permanently flushed and drained; While the bottom water is blued every now and then to discharge the sediments.

Improper boiler water pressure may increase energy consumption. The need for more purification operations and spending more money is another consequence of this. It should be known that the boiled water has the same temperature and pressure as the water in the boiler, so it can be used to increase the efficiency of boilers. Less water and fuel consumption, more appropriate cost of operation, reduction of maintenance and repair costs, and having clean steam with greater efficiency are among the advantages of Bludan in the boiler.

Saler Company Information

Company : Tehran Mobaddel
Phone : 00982177797779
More Information : View
Online order registration form