Industrial water cooler is one of the most widely used cooling equipments that can be seen and used in every dining hall, office and places with high traffic. Since the beginning of time, water has been consumed cold, and humans have always been looking for a way to cool water permanently. At first, old water coolers were used to cool water, later with the increase in population and the need for cool water in schools, offices and factories, the first form of water coolers was formed. Early water coolers had no refrigeration and consisted only of a water source into which ice was poured. These water coolers were not very suitable due to being operator-oriented and the possibility of contamination entering them and did not meet the needs of buyers. Industrial water coolers are the latest model of water coolers, this device is usually made of a metal body with a water source according to the capacity and a number of water taps. The refrigeration part of the industrial water cooler is made of a compressor, condenser, solenoid valve, and evaporator, which is usually located at the bottom of the device.
Industrial water cooler price

The price of an industrial water cooler depends on the capacity of the device, i.e. the daily or hourly flow rate, the material used in the construction of the body, of which steel is the most expensive, and the quality of the cooling unit used in the production and construction of the system.

The capacity of an industrial water cooler is actually the same as the number of valves of this device and the volume of the water source. As the volume of the water source increases, the number of valves in the device increases, and finally the device will be more expensive. As we said before, the body material of the industrial water cooler must be made of 304 steel. Meanwhile, there are profit-seeking manufacturers who use other sheets that are very similar to this type of steel instead of 304 steel, such as 430 and 201 steel, which have a much lower price than 304 steel, but these types of steel are not qualitatively suitable for environments in contact with water and oxidize very quickly.

The main part of the industrial air cooler is its refrigeration unit, in this part, the possibility of reducing or increasing the price is very high. The brand and power of the compressor used in the industrial water cooler has a great impact on the price of the industrial water cooler. In the production department, we use a compressor with the Scap brand, which is one of the most familiar brands in the world market, and for this reason, the refrigeration devices of this company also have a compressor warranty.

In the condenser section, dimensions and thermal power are very important both in terms of quality and price. The use of Sabkol company condensers is another distinguishing feature of the industrial water coolers produced by Tahiz Gostar in the Middle East, which makes these devices work without any problems in bad weather conditions such as coastal areas and hot desert areas. For more information on buying and asking the price of an industrial water cooler, please contact the company's experts.
All kinds of industrial water coolers

Industrial water coolers are usually divided based on capacity. The capacity of each device actually depends on the volume of the source inside the device and the water taps of the device. Industrial water coolers that are used in offices, schools and other crowded places must have a pressurized source so that they always have water as cool as their source. The pressure tank in the industrial water cooler means that when you take a glass of water out of the water cooler, the same amount of water as a glass of city water automatically enters the water cooler source, so the device will always have the same amount of cold water as the water source.

One of the main reasons for the difference in the price of industrial water coolers produced in reputable factories is the same pressurized tank. Water coolers that have a pressurized source need a more powerful compressor, and for this reason, their prices are more expensive than normal ones. The number of taps is another distinguishing element of an industrial water cooler. The more the number of taps of this device, the device should be equipped with a bigger source and naturally, its refrigeration unit should be considered more powerful. Of course, there are also a group of water coolers that do not have a pressurized source. Such water coolers are cheap in terms of price and do not have industrial efficiency. For example, you take out 10 liters of water from a 2-tap water cooler that is under pressure without a source. After this, the 10 liters of water that the device gives you is warm water that has not been cooled. It is an industrial standard to always provide water at 9 degrees to consumers.
Manufacturer of industrial water coolers

As mentioned earlier, the industrial water cooler consists of a metal body. Now it is better to explain what features this metal body should have. As we know, usually water coolers are used in crowded environments and environments where the possibility of contamination is high, so the body of the water cooler must be made of a material that can be cleaned permanently and does not rust if it comes into contact with water. We and all other reputable companies producing industrial water coolers agree that the best material for producing industrial water cooler body is scratched stainless steel 304. This type of steel is very resistant to oxidation due to the presence of chromium and nickel in its alloy, and it does not rust in any way when washed or placed in wet environments. In general, 304 steel is the most suitable option in environments or devices where hygiene is of great importance. The other part of the water cooler is the pressurized source, again the best option for this is stainless steel 304 and finally the main part of the device which is the cooling unit