filter
  • Seen : 300 View

0
filter

1- The use of resin hardeners (ion exchange) is one of the most appropriate and reliable methods of removing annoying ions, which solves the above problems by replacing the annoying ions in water and removing them completely.

2- While using the hardening device, make sure that the pressure inside the tank is between 1.7-2.5 bar, also the parts of the valve may be damaged at high pressures. In any case, it is not recommended to use the valve at pressures higher than 2.5 bar.

3- The hardness of the filtered water coming out of the hardener should always be controlled and tested with the test kit, as soon as the water hardness exceeds 2 rpm, the resin regeneration should be done immediately.

4- In twin hardeners, the system is online, and the water flow does not change in the form of time and flow during washing and regeneration.

Saler Company Information

Company : Celsius Engineering Technical Group
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
filter

1- The use of resin hardeners (ion exchange) is one of the most appropriate and reliable methods of removing annoying ions, which solves the above problems by replacing the annoying ions in water and removing them completely.

2- While using the hardening device, make sure that the pressure inside the tank is between 1.7-2.5 bar, also the parts of the valve may be damaged at high pressures. In any case, it is not recommended to use the valve at pressures higher than 2.5 bar.

3- The hardness of the filtered water coming out of the hardener should always be controlled and tested with the test kit, as soon as the water hardness exceeds 2 rpm, the resin regeneration should be done immediately.

4- In twin hardeners, the system is online, and the water flow does not change in the form of time and flow during washing and regeneration.

Saler Company Information

Company : Celsius Engineering Technical Group
More Information : View
Online order registration form