- Seen : 378 View
Kolak hot air heaters: ventilation of large environments in cold regions
Indoor heating is easier than ever
WA heaters (cabinet heaters) are the best choice for you who want the temperature of your working environment to be stable and uniform. The new low-consumption hot air systems of Kolak Gostar Yazd provide the heating needs of all people in any place and the costs of purchase, installation and operation are very economical.
The feature of WA heater of Kolak Gostar company
- Fast heating, economical
WA heaters bring the environment to the desired temperature in less than 20 minutes, even in large spaces. As a result, the ambient temperature can be kept low during non-working hours and energy costs can be saved.
- Constant temperature during working hours
Usually, in halls, repair shops and factories, the entrance doors are opened and closed regularly and cause the ambient temperature to drop. With WA heaters, the lost heat can be quickly replaced uniformly and the temperature of the workplace can be kept constant.
- Uniform distribution of heat
WA heaters transmit hot air through a duct system or are installed directly in the environment without ducts.
- Heating, fresh air, ventilation and air circulation
WA heater can be installed in three ways and choosing the right installation location is different according to the usage and safety restrictions and the type of ventilation. By installing WA inside the hall, it is possible to create fast and economical heating by circulating the ambient air (circulation). In this case, the amount of fuel consumption is lower than other methods. If you need fresh air, install the heater outside the hall and direct the hot air outlet into the environment through the channel; Or you can install the heater inside the hall and connect the air inlet to the fresh air outside.
Heater WA
- Easy to use for everyone
WA Kulak Gostar heaters are 100% compatible with the needs of different people in different weather conditions. The service engineers of this company do the measurement and calculation of the systems required by the customers free of charge.
- One hundred percent compatibility with various conditions
Easy temperature control
When WA heaters are used for heating and air circulation only, the temperature can be controlled via a normal thermostat or via the KGY control panel (to be ordered separately). One of the features of the KGY control panel is that you can turn off the heater on weekends and during non-working hours and provide the required heating speed again if needed.
Fully automatic temperature control
If you want to have heating, air circulation and ventilation together, you can use the KGY automatic control system, which controls air circulation and temperature changes through the intake air sensor. With the KGY control system, air inlet and outlet and ambient temperature are automatically adjusted according to your wishes.
- Reduce costs with hot air heaters: cost-effective solution with high efficiency
Our customers use KGY products to have a suitable working environment at the best price. Hot air furnaces are the best alternative to other heating methods because they not only bring the ambient temperature to optimal conditions, but also their maintenance and use costs are very economical.
- Extensive accessories
Kolak Goster has designed a wide range of high-quality accessories for hot air heaters, which each customer can order according to their conditions and needs.
- High quality, up-to-date technology
WA hot air furnaces are designed for cold regions by using the highest technology in the world and using stainless steel in the main combustion chamber and multi-layered steel surfaces, which increases the life of the heater and great efficiency. has been
- Providing services throughout the country
The technology of Kolak Gostar Yazd hot air heaters requires minimal service and repairs. However, Kolak Gostar Yazd offers its services all over the country if needed, and our experienced engineers and staff are at your service anywhere in the country.
WA technical specifications of the heater series
made
The WA is housed in a body made of two-layer hot-dip galvanized panels with 30 mm insulation and a profile corner with a protective and light-resistant enamel powder coating.
The WA chamber consists of the combustion chamber and the fan, which are connected in a coherent body
The main combustion chamber is made of stainless steel
The hot air heater can be connected to the ambient channel or the heated air can be sent directly to the environment
WA can be connected to outside fresh air through duct
The device has the ability to install an air filter to purify the incoming air (accessories).
WA hot air outlet can be connected to the four sides or the top side of the device (according to order)
WA hot air furnace is made in two vertical and horizontal models
In order to move it safely, a hook is equipped in the exhaust opening above the device, which can be used during the installation of the hot air heater.
WA can be connected to the weekly control panel system so that the temperature of different days and nights of the week can be adjusted automatically (accessories)
A wide range of accessories are available for WA heaters. This equipment includes the channel and its valve, covering panels, chimney, tee, burner, etc.
Control
WA can be controlled and measured through boiler thermostats and outlet temperature
In the control panel of this hot air heater, regardless of whether the burner is on or off, the fan status can be adjusted directly for the continuous ventilation of the hall.
The burner can be turned off through the control panel
WA is equipped with an hourly scheduling system
Saler Company Information
