- Seen : 289 View
One of the most important equipment used in shafts, petrochemicals, gas boosting stations and other industries is air coolers that reduce the heat of the fluid inside the tube by using air vent on finishes. These fluids may be natural gas, oil liquids and water. Air coolers are highly sensitive in terms of manufacturing technology, especially its headers, and are designed and manufactured in the Induced / Forced Draft and API-661, ASME, and TEMA standards.
Some of the facilities offered include air coolers, automatic switching of the Louver to control the output temperature, the use of a thermal coil to prevent fluid freezing in cold weather conditions, an automatic control system for angled fans, a system for controlling engine speeds to get The proper heat output and installation of control valves.
Among the air coolers made in Arak Machining, the following can be mentioned:
- South Pars Phase 1: 16 units weighing 748 tons
- South Pars Phases 4 and 5: 78 devices
- South Pars Phase 14: Including 52 units weighing 3200 tons
- Yasouj Pressure Strengthening Station: Includes 69 S1 and S2 bundle units with a design pressure of 91 bar and a weight of 1,100 t.
- National Drilling Project: Includes 18 bundles with a design pressure of 150 psi and a weight of 36 tons
- Lavan Project: Includes 10 bundle tubes with different pressures from 20 to 38.7 and weighing 138 tons.
- Ramshir Project: Includes 3 irrigation devices with a design pressure of 304 times and a weight of 50 tons
- Sarkhon Project: Includes an I / O design with a design pressure of 13.92 and a weight of 10 tons
- Mobarakeh Steel Esfahan: Includes two 3-valve design air-cooled devices with a weight of 271 tons
- Arak Petrochemical Complex: An Irklar Air Pressure Designer with a Load of 3.79 and a Weight of 370 Tons
- Bandar Abbas Refinery: 16 bundle tubes with design pressure of 79.3 and 200 tons
- Ilam Petrochemical Company: 17 bundle tubes with a design pressure of 30 bar and a weight of 500 tons
Saler Company Information
