NFCH channel fan coil
  • Seen : 494 View

0
NFCH channel fan coil

Due to the consideration of high static pressure in the design, this series of fan coils is used for places that require long ducts.
NFCH fan coil is designed and produced in 8 different models with ventilation range from 600 to 2000 cubic feet per minute, cooling capacity from 2.3 to 9.16 kW and heating capacity from 6.7 to 27.5 kW.

Advantages:

Light structure and at the same time very resistant
No vibration and noise
Using a tray under the coil without sharp corners and its inclined installation, which causes the water to completely exit the tray and prevents the accumulation and growth of bacteria.
The low height of the fan coil provides the ability to install in small spaces.
The sheet parts are equipped with arma flex insulation in order to prevent the formation of dew on the parts and reduce the operation noise
Using a polymer filter with very low pressure drop and better air filtration
The possibility of producing coils with coated fins to prevent corrosion
Installing the air valve and drain valve on the inlet and outlet headers
Use of integrated galvanized fan for long life

Saler Company Information

Company : Nik
Phone : 00982144983720
More Information : View
Online order registration form
No comments have been posted yet
loading
Your comment has been sent
NFCH channel fan coil

Due to the consideration of high static pressure in the design, this series of fan coils is used for places that require long ducts.
NFCH fan coil is designed and produced in 8 different models with ventilation range from 600 to 2000 cubic feet per minute, cooling capacity from 2.3 to 9.16 kW and heating capacity from 6.7 to 27.5 kW.

Advantages:

Light structure and at the same time very resistant
No vibration and noise
Using a tray under the coil without sharp corners and its inclined installation, which causes the water to completely exit the tray and prevents the accumulation and growth of bacteria.
The low height of the fan coil provides the ability to install in small spaces.
The sheet parts are equipped with arma flex insulation in order to prevent the formation of dew on the parts and reduce the operation noise
Using a polymer filter with very low pressure drop and better air filtration
The possibility of producing coils with coated fins to prevent corrosion
Installing the air valve and drain valve on the inlet and outlet headers
Use of integrated galvanized fan for long life

Saler Company Information

Company : Nik
Phone : 00982144983720
More Information : View
Online order registration form